Being able to create new faceplates for the ERS-1000 has been the holy grail of ideas in the community for many years, but I had never seen anyone attempt it. After having sucess creating the clear arm part, I took the risk and tried to make a faceplate.
At first I tried to make a mold with the eye lenses remove from the faceplate, but I found that this caused a lot of issues. I also tried to make the faceplate in two halves but this failed. Eventually I settled on making the faceplate in one piece with the eye lenses attached for simplicity.
This turned out to be a surprising success and I was able to create a clear faceplate, similar to the skeleton ERS-1000.
This turned out to be a surprising success and I was able to create a clear faceplate, similar to the skeleton ERS-1000.
ERS-1000の新しいフェイスプレートを作ることは、長年コミュニティの目標でしたが、誰も挑戦したことはありません。透明な腕のパーツを作ることに成功した後、私はリスクを冒してフェイスプレートの製作に挑戦しました。
最初は、フェイスプレートから眼球レンズを取り外した状態で型を作ろうとしましたが、多くの問題が発生することがわかりました。また、フェイスプレートを2つに分割することも試みましたが、失敗に終わりました。最終的に、簡素化のため、眼球レンズを取り付けた一体型のフェイスプレートを作ることにしました。
これは思いがけず成功し、ERS-1000のスケルトンに似た透明なフェイスプレートを作ることができました。
これは思いがけず成功し、ERS-1000のスケルトンに似た透明なフェイスプレートを作ることができました。