One of the internal parts of the ERS-1000 I wanted to show was the back sensor. The part is quite aesthetically pleasing, with its parts of gold traces showing through the black.
The normal back sensor cover is made of flourorubber - an extremely hard wearing rubber that also has high temperature and chemical resistance. It would be impossible to make it out of the same material, and I didnt want to use silicone either, so I settled on soft resin instead as it was cheap and readily available to me.
I was able to make a mold of the original part and then tweak the soft resin formula to the correct strength. It was very hard to make as there were always bubbles forming due to the nature of the resin and mold structure - it was impossible to eliminate them. But I did manage to get a few usable examples with trial and error.
I was able to make a mold of the original part and then tweak the soft resin formula to the correct strength. It was very hard to make as there were always bubbles forming due to the nature of the resin and mold structure - it was impossible to eliminate them. But I did manage to get a few usable examples with trial and error.
The usable part I settled on for my aibo looks and feels great. The part still has the same texture as the OEM part and I was able to make it black with the right amount of transparency needed.
ERS-1000の内部部品の一つで、バックセンサーを紹介したかった。この部品は、金色のトレースが黒い背景に見える、とても美的に魅力的なデザインです。
通常のバックセンサーカバーはフロロラバーで作られています。これは非常に耐久性があり、高温や化学物質にも強いゴムです。同じ素材で作るのは不可能で、シリコンも使いたくなかったので、代わりに安価で手に入りやすいソフトレジンを選びました。
オリジナル部品のモールドを作り、ソフトレジンの配合を調整して適切な強度にすることができました。しかし、樹脂とモールドの構造上、気泡が発生しやすく、完全に取り除くのは非常に難しかったです。それでも、試行錯誤を重ねていくつかの使える部品を作ることができました。
オリジナル部品のモールドを作り、ソフトレジンの配合を調整して適切な強度にすることができました。しかし、樹脂とモールドの構造上、気泡が発生しやすく、完全に取り除くのは非常に難しかったです。それでも、試行錯誤を重ねていくつかの使える部品を作ることができました。
私のアイボに使用した完成品は、見た目も手触りも素晴らしく、OEM部品と同じ質感を保ちつつ、必要な透明度を持った黒い仕上がりになりました。